浙江吉沃工业科技有限公司

浙江吉沃工业科技有限公司

Language
- 中文版
- English

4

Is something wrong with the underside of the car

A slight knock on the chassis of a car is fine, but a severe knock will damage it. 1, the chassis is the part of the installed oil, if the oil leakage, then the lack of lubrication of the engine will produce cylinder problems; 2. If the exhaust pipe under the chassis or the three-way catalyst is damaged, it will cause the car exhaust system problems; 3. If the suspension of the car is damaged and deformed, the four-wheel positioning of the car will cause problems.

2022-08-30

What parts of the car chassis should be checked

What parts of the car chassis should be checked

First of all, let's talk about the components of the automobile chassis, which are mainly divided into: steering system, transmission system, driving system, braking system, electrical lines and other components. The purpose of chassis inspection is to check whether the lower parts of the steering system, transmission system, driving system, braking system and other parts of the chassis that are visually accessible at the bottom of the vehicle are intact, fixed and connected reliably.

2022-08-30

What is the purpose of a car chassis?

What is the purpose of a car chassis?

The role of the automobile chassis is to support and install the automobile engine and its component assembly, form the overall shape of the automobile, and accept the power of the engine, make the automobile movement, ensure the normal running. The vehicle chassis is composed of four parts: transmission system, driving system, steering system and braking system. The function of the transmission system is to ensure the necessary traction and speed of the vehicle under various driving conditions. The driving system is through the adhesion between the wheel and the road surface, so that the torque from the transmission system into the driving torque of the car; The steering system can control the driving direction of the vehicle according to the wishes of the driver, which is very important to the driving of the vehicle. The braking system allows the moving car to slow down, stop, and maintain a steady speed when going downhill.

2022-08-30

About the maintenance and fuel consumption of the car chassis

About the maintenance and fuel consumption of the car chassis

1. The front pulley is properly adjusted. Inaccurate front beam will increase the rolling resistance of the vehicle and increase fuel consumption. Check the forebundle value regularly and compare it with the normal value. If the value is different, adjust it. 2. Wheel bearing is well lubricated and properly adjusted. Poor wheel grease and improper adjustment of bearing clearance will increase the driving resistance.

2022-08-30

The arrangement of the transmission system

The arrangement of the transmission system

The common arrangement of automobile transmission system is mainly related to the position of engine and the driving form of automobile. The arrangement of automobile transmission system can be divided into the following five categories:

2022-08-30

Composition and function of automobile chassis

Composition and function of automobile chassis

The vehicle chassis is composed of transmission system, driving system, steering system and braking system. The role of the chassis is to support and install the automobile engine and its components and assemblies, form the overall shape of the automobile, and accept the power of the engine, so that the automobile can produce motion and ensure the normal running of the automobile.

2022-08-30

How to maintain auto parts?

How to maintain auto parts?

If the parts of fuel filter, oil filter, air filter, hydraulic oil filter and all kinds of filter screen are too dirty, it will lead to poor filtration effect, too much impurities into the oil cylinder, aggravate the wear of parts, increase the possibility of failure; If it is heavily clogged, it will also cause the vehicle to not work properly. Water tank radiator, air cooled engine cylinder and cylinder head radiator, cooler radiator and other parts are too dirty, will lead to poor heat dissipation, high temperature. Therefore, for this kind of "afraid of dirty" parts should be cleaned and maintained in time.

2022-08-30

Introduction of emergency methods for automobile chassis system damage

Introduction of emergency methods for automobile chassis system damage

When it comes to car maintenance, chassis care is easy to be ignored by the driver friends, but in winter or wet weather the importance of chassis maintenance is very obvious. In winter to the chassis maintenance to do chassis cleaning and rust treatment. First of all, we should clean the chassis. If there is too much dirt on the chassis, we should also use the cleaning agent to wash it again, so that the chassis reveals the original "true color", so that the antirust care can start.

2022-08-30

How to prevent car chassis rust

How to prevent car chassis rust

Is there any way to protect the chassis? "Chassis armor" is a feasible method to protect chassis at present. "Chassis armor", as the name implies, is to equip the chassis of the car with strong armor. Professional chassis armor is to spray 3-5 layers of special anti-rust glue to the automobile chassis, the chassis and the noise parts above the hub are completely wrapped up, to be formed after natural consolidation of the chassis protective layer, can reduce the damage of sand impact, anti-corrosion anti-rust.

2022-08-30

The advantages and disadvantages of using aluminum alloy, cast iron and stamping parts in automobile chassis suspension system

The advantages and disadvantages of using aluminum alloy, cast iron and stamping parts in automobile chassis suspension system

The suspension part of the car is made of aluminum alloy, cast iron and stamping parts. Each has its pros and cons. 1. Advantages of aluminum alloy: small weight (conducive to reducing the unsprung mass, reducing the unsprung mass can improve the control performance), high strength, no deformation, high precision. Disadvantages: high cost, encounter strong external force impact will fracture.

2022-08-30

Jiwo

Follow Jiwo

Quick Links

Products
About us
Technical
News
Contact us

Contact Us

Tel：86-572-2026333

Fax：86-572-2026332

E-mail：jiwo@zjjiwo.com

© Zhejiang Jiwo Industrial Technology Co., Ltd. All Rights Reserved. Powered by www.300.cn

©2022浙江吉沃工业科技有限公司 All Rights Reserved. 网站建设:中企动力台州